| |
|
|
WD600
|
DRIP, TRACER: The WD600 Thermodynamic Steam Trap is commonly used as a drip trap on steam mains and steam supply lines. These traps can be used on tracing applications; however, thermostatic traps are normally recommended for this service. Ideal for outdoor applications that are subject to freezing and for superheated steam conditions.
Note: Model WD600L is a low-capacity version of the standard WD600 model.
 CATALOG SPEC SHEET(S)
|
Model: WD600
Body Material: Stainless Steel 420F
Max Capacity: 4,840 lbs/hr
Max Operating Pressure: 600 PSIG
Sizes : 3/8" - 1"
Connections: NPT
|
| |
|
|
WD600S
|
DRIP, TRACER: The WD600S Thermodynamic Steam Trap is commonly used as a drip trap on steam mains and steam
supply lines. Supplied with integral strainer and optional
blowdown valve to protect the trap from contamination. These
traps can be used on tracing applications; however, thermostatic
traps are normally recommended for this service. Ideal for
outdoor applications that are subject to freezing and for
superheated steam conditions.
Note: Model WD600LS is a low-capacity version of the standard WD600S model. Model WD600SB contains a strainer and blowdown valve.
CATALOG SPEC SHEET(S) |
Model: WD600S
Body Material: Stainless
Max Capacity: 3,140 lbs/hr
Max Operating Pressure: 600 PSIG
Sizes : 1/2" - 1"
Connections: NPT
|
| |
|
|
WD700S
|
DRIP, TRACER: The WD700S Thermodynamic Steam Trap is commonly used as a drip trap on steam mains and steam
supply lines. These traps are used on tracing applications;
however, thermostatic traps are normally recommended for
this service. Supplied with an integral strainer and optional
blowdown valve to protect the trap from contamination. The
internal working mechanism of the WD700S can be completely
replaced while the trap body remains in line. Ideal for outdoor
applications that are subject to freezing and for superheated
steam conditions.
Note: Model WD700HS is a high-pressure version of the standard WD700S model.
CATALOG SPEC SHEET(S) |
Model: WD700S
Body Material: Chrome-Moly Alloy Steel
Max Operating Pressure: 600 PSIG
Max. Capacity: 1,750 lbs/hr
Sizes : 1/2" - 1"
Connections: NPT, SW, FLG
|
| |
|
|
WD900S
|
DRIP: The WD900S/WD900LS Thermodynamic Steam Trap is
primarily used as a drip trap on high pressure steam mains
and steam supply lines. Ideal for outdoor applications that
are subject to freezing and for superheated steam conditions.
Note: Model WD900LS is a low-capacity version of the standard WD900S model and recommended for working pressures of 120 PSIG and above.
CATALOG SPEC SHEET(S) |
Model: WD900S
Body Material: Low Carbon Chrome-Moly
Max Operating Pressure: 900 PSIG
Max. Capacity: 968 lbs/hr
Sizes : 1/2" - 1"
Connections: NPT, SW, 600# FLG
|
| |
|
|
WD3600
|
DRIP, TRACER: The WD3600 Thermodynamic Steam Trap is
commmonly used as a drip trap on high-pressure steam mains
and steam supply lines. Supplied with an integral strainer to
protect the trap from contamination. The internal working
mechanism of the WD3600 can be completely replaced while
the trap body remains in line. Ideal for outdoor applications that
are subject to freezing and for superheated steam conditions.
CATALOG SPEC SHEET(S) |
Model: WD3600
Body Material: Forged Alloy Steel
Max Operating Pressure: 3,600 PSIG
Max. Capacity: 625 lbs/hr
Sizes : 1/2" - 1"
Connections: BW, SW, 600# FLG, 1500# FLG
|
| |
|
|
| |
|
|
Products > Steam Traps > Thermodynamic Steam Traps |
Product Catalog - Steam Traps