| |
|
|
WSIB450
|
DRIP, TRACER: The WSIB450 Inverted Bucket Steam Trap
Module, mounted to a universal connector, is typically used for
drip and tracing applications. Also used on process equipment
with light loads and where air removal is not critical. The
WSIB450 trap module mounts to any universal connector.
Note: Model WSIB450H is a higher capacity version of the standard WSIB450 model
 CATALOG SPEC SHEET(S)
|
Model: WSIB450
Body Material: Stainless Steel
Max Capacity: 1,060 lbs/hr
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
|
| |
|
|
WFT450
|
PROCESS, DRIP: The WFT450 Float & Thermostatic Trap Module mounted to a universal connector, is typically used on process
equipment that generate light condensate loads and require excellent
air handling capabilities. These low capacity float & thermostatic
trap modules can also be used in drip service on steam mains,
tracer systems and steam supply lines. The WFT450 trap module
mounts to any universal connector.
CATALOG SPEC SHEET(S) |
Model: WFT450
Body Material: Stainless Steel
Max Capacity: 1,500 lbs/hr
Max Operating Pressure: 225 PSIG
Connections: Fits WU450 Series Universal Connectors
|
| |
|
|
WD450
|
DRIP, TRACER: The WD450 "Top Mount" Thermodynamic Steam Trap
Module mounted to a universal connector can be used anywhere
conventional thermodynamic steam traps are used. Used on drip,
tracing and light process applications where removal of air is not
critical. The WD450 trap module mounts to any
Universal Connector. The WD450 is recommended for horizontal
piping only so that cap can be oriented upwards, as shown.
Note: Model WD450L is a lower-capacity version of the standard WD450 model.
CATALOG SPEC SHEET(S) |
Model: WD450
Body Material: Stainless Steel
Max Capacity: 1,630 lbs/hr
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
|
| |
|
|
WD450SM
|
DRIP, TRACER: The WD450SM "Side Mount" Thermodynamic Steam Trap
Module mounted to a universal connector can be used anywhere
conventional thermodynamic steam traps are used. Used on drip,
tracing and light process applications where removal of air is not
critical. The WD450SM trap module mounts to any
Universal Connector.
Note: Model WD450LSM is a lower-capacity version of the standard WD450SM model.
CATALOG SPEC SHEET(S) |
Model: WD450SM
Body Material: Stainless Steel
Max Capacity: 1,630 lbs/hr
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
|
| |
|
|
WD600LSM-
HP
|
DRIP, TRACER: The WD600LSM-HP "Side Mount" Thermodynamic Steam Trap
Module mounted
to a universal connector can be used anywhere conventional
thermodynamic steam traps are used. Used on drip, tracing
and light process applications where removal of air is not
critical. The WD600LSM-HP trap module mounts to any
Universal Connector.
CATALOG SPEC SHEET(S) |
Model: WD600LSM-HP
Body Material: Stainless Steel
Max Capacity: 730 lbs/hr
Max Operating Pressure: 600 PSIG
Connections: Fits WU450 Series Universal Connectors
|
| |
|
|
WT450
|
DRIP, TRACER, PROCESS: The WT450 Thermostatic Steam Trap Module mounted on a universal connector can be used anywhere
conventional thermostatic steam traps are used. Used on drip,
tracing and light process applications. The WT450 trap module
mounts to any universal connector.
CATALOG SPEC SHEET(S) |
Model: WT450
Body Material: Stainless Steel
Max Capacity: 3,019 lbs/hr
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
|
| |
|
|
WB450
|
The WB450 Series Bi-Metallic Steam Trap Module is used in steam tracing
applications (process lines, instrumentation and winterization,
general steam jacketing) and small process applications where
accurate control of condensate discharge temperature is required
to provide maximum usage of energy.
CATALOG SPEC SHEET(S) |
Model: WB450
Body Material: Stainless Steel
Max Capacity: 784 lbs/hr @ 280°F
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
|
Product Catalog - Steam Traps